Range Hoods Low Severity
F2 Appliance Error Code

Maytag Range Hoods F2 Error: Light circuit fault

What Does Maytag Range Hood Error Code F2 Mean? F2 on Maytag MHY range hoods signals a fault in the cooktop lighting circuit. Lights may not turn on, may flicker, or only one of dual-lamp hoods may work. F2 is among the most common Maytag MHY faults but usually one of the cheapest to resolve. […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. Fan still works. No safety issue; purely a lighting inconvenience.

Can I reset the code?

Yes. Replacing bulbs typically clears F2. Switch/driver faults require service.

When to stop immediately?

Stop if you notice: F2 persists after bulb replacement, Visible scorching at light fixture.

Symptoms You May Notice

Lights do not turn on

No illumination when light switch is pressed.

Lights flicker or flash

Erratic on/off behavior.

Only one of multiple lamps works

On dual-lamp hoods, one works and one does not.

Fan operates normally

The hood's fan speeds all work as expected — only the lighting circuit is affected.

Possible Causes

1

Burned-out bulb(s)

Most common — bulbs eventually fail.

DIY Possible
2

Failed light switch

Switch has failed internally.

Requires Professional
3

Failed LED driver (LED-equipped models)

Electronic driver for LED lamps has failed.

Requires Professional
4

Wiring fault in light circuit

Harness has shorted or opened.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Replace bulbs

    Turn off the hood's circuit breaker. Replace all bulbs per the Maytag MHY owner manual — usually screw-in or twist-lock halogen or LED.

    Check owner manual for correct bulb type and wattage.

  2. 2

    Check light switch operation

    After replacing bulbs, toggle the light switch several times. Consistent operation means switch is good; intermittent behavior suggests switch failure.

    New bulbs usually resolve 80% of F2 faults on MHY hoods.

When to Call a Professional

Contact a qualified technician if:

  • New bulbs do not resolve F2
  • Switch fails continuity test
  • Wiring damage visible

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Range Hoods Repair Service Schedule Appointment

More Range Hoods Error Codes

View all codes →
F5 F4 F3 F1