Range Hoods Medium Severity
F1 Appliance Error Code

Maytag Range Hoods F1 Error: Fan motor fault

What Does Maytag Range Hood Error Code F1 Mean? F1 on Maytag MHY range hoods signals a fan motor fault. The hood’s main function — removing cooking smoke, steam, and combustion byproducts — is lost when the fan fails. F1 can indicate motor failure, control board failure, or a simple blade obstruction from grease buildup. […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Maybe. Hood can still provide lighting but no ventilation — do not use with gas range until fan operational to avoid CO buildup.

Can I reset the code?

Yes. Power cycle may clear transient. Hardware faults return.

When to stop immediately?

Stop if you notice: F1 persists after cleaning and power cycle, Burning smell from fan motor.

Symptoms You May Notice

Fan does not start when turned on

No airflow from the Maytag MHY hood when fan switch activated.

Fan audible but no airflow

Motor runs but damper is stuck or blade detached.

Speed commands have no effect

Multi-speed hoods stuck at one speed regardless of setting.

Cooking smoke lingers in kitchen

Without ventilation, smoke and steam from the cooktop accumulate visibly in the kitchen.

Possible Causes

1

Failed fan motor

Motor windings open or bearings seized.

Requires Professional
2

Failed speed control board

Control module driving fan speed has failed.

Requires Professional
3

Obstructed fan blade

Grease buildup has jammed the blade.

DIY Possible
4

Damaged wiring or fan switch

Switch or harness has failed.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Clean grease filter and inspect fan

    Remove the grease filter from the Maytag MHY hood. Visually inspect the fan blade for grease accumulation or debris.

    Heavy grease buildup can bind the fan; clean with degreaser.

  2. 2

    Power cycle

    Turn off the hood's circuit breaker for 60 seconds, restore power, try fan again.

    Clears transient control faults.

When to Call a Professional

Contact a qualified technician if:

  • Fan motor reads infinite ohms on multimeter
  • Fan blade visibly damaged
  • Control board visibly burnt

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Range Hoods Repair Service Schedule Appointment

More Range Hoods Error Codes

View all codes →
F5 F4 F3 F2