Maytag Dishwasher F6E2 Error: Water flow out of range
What Does Maytag Dishwasher Error Code F6E2 Mean? F6E2 on Maytag JetClean, PowerBlast, and MDB dishwashers means the water flow rate during fill is outside acceptable limits. The control expects a specific flow rate based on the expected water supply pressure; if the rate is too low (restricted supply) or inconsistent (failing valve), F6E2 is […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. Incorrect fill levels risk overflow or poor wash performance. Resolve before running cycles.
Can I reset the code?
Yes. Power cycle clears the code. Returns if flow rate issue persists.
When to stop immediately?
Stop if you notice: F6E2 persists after pressure and screen check, Water visibly overfilling.
Symptoms You May Notice
Cycle halts shortly after fill
The fill phase begins but the water flow rate is reported as abnormal, causing the cycle to stop within minutes.
Dishwasher over-fills or under-fills visibly
Tub has obviously wrong water level when cycle pauses.
Inconsistent fill times across identical cycles
Same cycle takes different amounts of time to fill on different days.
Weak or intermittent water flow
The fill sounds quieter than normal or starts and stops, indicating inconsistent water supply pressure.
Possible Causes
Low house water pressure
Supply pressure below the 20 PSI minimum for JetClean dishwashers.
DIY PossiblePartly-clogged inlet screen
Screen is restricting flow but not fully blocking.
DIY PossibleFailed inlet valve
Valve is sticking open or closed inconsistently.
Requires ProfessionalSafe Checks You Can Do
-
1
Test house water pressure
Run hot water at the kitchen sink and time how long to fill a 1-gallon container. Should be 60 seconds or less for normal pressure.
Slower than 60 seconds indicates low supply pressure; multiple fixtures at once may further reduce it.
Tools required -
2
Clean the inlet screen
Shut off the supply, disconnect the water line from the back of the dishwasher, pull the mesh screen, and rinse.
Common cause of flow issues after plumbing work upstream.
Tools required
When to Call a Professional
Contact a qualified technician if:
- House pressure confirmed normal but F6E2 returns
- Inlet valve clicks inconsistently
- Flow meter reads erratic values
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dishwasher Repair Service Schedule Appointment