Maytag Washer INT Error: Cycle interrupted
What Does Maytag Washer Error Code Int Mean? Int on Maytag Bravos XL and MVWB washers means “cycle interrupted.” It appears when the user presses the Cancel or Pause button during an active cycle — the control acknowledges the cancel, starts a safe-halt sequence (stopping rotation, draining as needed, and releasing the lid lock when […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. Int is informational, not a fault. Resume or restart once the drum has stopped.
Can I reset the code?
Yes. Cycle naturally completes its safe-halt and Int clears. No action needed.
When to stop immediately?
Stop if you notice: Int appears without pressing Cancel (repeatedly), Washer loses power randomly during cycles.
Symptoms You May Notice
Cycle winding down after cancel
Normal behavior — the washer safely unwinds the active cycle after the Cancel button was pressed.
Delay of 30 seconds to 5 minutes before lid unlocks
The washer waits for drum to stop rotating before releasing the lock.
Int persists if control loses cancel signal mid-stop
Rare — if the cancel button registers once then a glitch occurs, Int can stay displayed.
Lid remains locked temporarily
The lid lock stays engaged for 1-2 minutes while the washer safely completes the wind-down sequence.
Possible Causes
Normal user cancel
The most common reason — user pressed Start/Pause/Cancel to halt a cycle.
DIY PossibleIntermittent touchpad fault
Cancel button was briefly shorted by moisture or debris.
DIY PossibleBrief power blip during cycle
Momentary power loss can be read as cancel by the control on some firmware.
Requires ProfessionalSafe Checks You Can Do
-
1
Wait for drum to stop
Do not attempt to force the lid. Wait 3–5 minutes for Int to clear and the lock to release.
Trying to lift the lid forcibly during Int will damage the lock mechanism.
-
2
Resume or restart the cycle
If Int was unintentional, press Start/Pause to resume, or select a new cycle.
Int is not a fault — it is a safe-halt indication.
When to Call a Professional
Contact a qualified technician if:
- Int appears with no user input on multiple cycles
- Washer circuit breaker trips during cycles
- Touchpad shows other intermittent faults
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Washer Repair Service Schedule Appointment