Maytag Oven LOC Error: Control lock active
What Does Maytag Wall Oven Error Code Loc Mean? The Loc indicator on a Maytag wall oven means the Control Lock feature is active. This is not a fault code — it is an intentional control panel lockout that disables all keypad input to prevent unintended changes or accidental activation. When Loc is displayed, pressing […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. Loc is not a fault — it is a deliberate control feature. The oven is fully operational once the Control Lock is deactivated. An active cook cycle during lock is completing normally.
Can I reset the code?
Yes. Control Lock is cleared by pressing and holding the Lock key for 3 seconds, or by a circuit breaker reset. No repair or service is needed unless the lock activates repeatedly without user input, which may indicate a stuck keypad key.
When to stop immediately?
Stop if you notice: Control Lock reactivates by itself repeatedly without user input, Unlock key hold sequence does not clear the Loc indicator after multiple attempts.
Symptoms You May Notice
All control panel keys are unresponsive
Pressing any key — including Start, Cancel, or numeric pad — produces no response because the Control Lock feature has disabled all touchpad input.
"Loc" or a lock icon is visible on the display
The control panel displays the Loc indicator continuously, distinguishing this non-fault status from an error code that requires repair.
Active cook cycles continue uninterrupted while the panel is locked
If Control Lock was activated during a bake cycle, that cycle continues normally — the lock prevents new commands but does not interrupt ongoing cooking.
Clock display still visible
The time and temperature display works — only the cooking controls are locked.
Possible Causes
User intentionally activated Control Lock
The household occupant activated the Control Lock feature to prevent unintended operation — typically by pressing and holding a specific key or key combination for 3 seconds.
DIY PossibleChild accidentally pressed and held the lock key combination
A child or pet leaning on the control panel triggered the lock sequence, which requires a deliberate 3-second hold to activate.
DIY PossibleSticky or partially stuck keypad key triggering the lock hold sequence
A membrane key that is stuck partially depressed can register the required hold duration and activate Control Lock without user intent.
DIY PossibleSafe Checks You Can Do
-
1
Unlock the control panel using the designated key hold sequence
On most Maytag MEW and MMW models, press and hold the Lock key (or the designated key labeled with a padlock icon) for approximately 3 seconds until the Loc indicator extinguishes. Consult your model's owner manual for the exact key if the lock key is not labeled.
Some Maytag Gemini double-wall oven models use the Cancel key held for 3 seconds as the unlock sequence rather than a dedicated Lock key.
-
2
If the unlock sequence does not work, perform a breaker reset
Shut off the oven's circuit breaker for 60 seconds and restore power. A full power reset clears the Control Lock state on all Maytag wall oven models.
After the reset, confirm the panel responds normally before attempting to set a new lock to verify the lock feature is functioning correctly.
When to Call a Professional
Contact a qualified technician if:
- Loc activates automatically due to a stuck touchpad key — keypad replacement may be needed
- Unlock sequence is unresponsive after multiple attempts and a breaker reset — control board may have faulted
- Persistent lock combined with touchpad faults suggests a simultaneous F2E1 membrane fault
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Oven Repair Service Schedule Appointment