Maytag Ice Maker BN Error: Ice bin full detected
What Does Maytag Ice Maker Error Code bN Mean? bN on Maytag MIM standalone ice makers means the bin-full sensor has detected ice at the maximum level. Production automatically pauses until ice is removed. bN is normal operation, not a fault — it prevents overflow and ice spillage. Common Causes Actual full bin is the […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. bN is normal operation. No fault.
Can I reset the code?
Yes. Remove ice — code clears automatically.
When to stop immediately?
Stop if you notice: bN persists with visibly empty bin, Ice production never resumes.
Symptoms You May Notice
Ice production has stopped
The ice maker halts production because the bin sensor detects a full bin or a blockage in the ice chute.
Ice bin is visibly full
Ice reaches the level sensor.
Occasionally false trigger with sensor obstruction
Ice clumps can mask actual bin level from sensor.
Ice level appears full in bin
The bin is visibly full or ice pieces are jammed against the level-sensing arm.
Possible Causes
Ice bin actually full
Normal operation — remove some ice.
DIY PossibleIce clumping blocking sensor
Ice has fused into a mass that occludes the level sensor.
DIY PossibleFailed bin sensor
Sensor reports full when bin is not.
Requires ProfessionalSafe Checks You Can Do
-
1
Empty or reduce ice
Remove ice to at least half bin level; break up any large clumps.
Ice that has been stored too long clumps and blocks sensor.
-
2
Wait for production restart
bN typically clears within 10-15 minutes after ice is removed.
No manual reset needed on most MIM models.
When to Call a Professional
Contact a qualified technician if:
- bN on empty bin — sensor failure
- Bin sensor visibly damaged
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Ice Maker Repair Service Schedule Appointment